What’s the Problem Jaw crusher Installation Should Pay Attention to?

RELEASE TIME:2017-09-11 11:35:29

the problem jaw crusher installation should pay attention to :

1.Because of the machine in the work of a large amount of vibration, so the machine should be installed on the basis of reinforced concrete structure, the basis of the weight of the machine can take roughly 8-10 times the weight of the foundation The depth of the land is greater than the depth of the land freeze, the base map provides the size of the host and the motor anchor bolts relative position and other related parameters, not as a construction map.

2.The second grouting cement firmly and then tighten the anchor bolts. In these processes, the level of the machine must be measured by the level, and the deviation of the level is controlled below 2 mm in the width of the front wall of the frame.

3.The installation of the motor in addition to check the distance with the host, but also check the motor pulley and the host wheel center parallel to the corresponding to ensure that all the V-belt work effectively and consistently.

4.The size of the discharge port size should be required according to the size of the product and processing capacity