Measures to Maximize the Productivity of Cone Crusher

RELEASE TIME:2017-08-21 14:52:43

Equipment capacity to maximize the production of many gravel manufacturers are dreaming, if the equipment does not pay attention to the operation of these points, you can use it later, can help your cone crusher to a higher level of productivity.

1.To keep the tight side of the discharge port parameters unchanged.

Want to stabilize the production of gravel products, quality and production line load, we must first ensure that the cone is broken edge of the discharge port parameters unchanged, or easily lead to accidental increase in product size Large, and thus affect the entire production line system and the final production.

2. Try to continue "full of" operation.

If a cone broken due to feed instability and other factors "hungry" when "full", then its product size, product rate, etc. will also fluctuate. Semi-cavity operation of the conical broken, its products in the grading, needle-like, etc. are not ideal. It is recommended that gravel manufacturers try to ensure that the cone is full of cavity operation, in order to obtain better throughput and grain.

3.The feed is not too little.

Only to a small amount of raw materials and will not reduce the burden of conical break, on the contrary, too little raw material will not only damage the product yield, poor grain, but also the cone of the bearing negative effects.