Jaw Crusher Operation Precautions
RELEASE TIME:2017-06-12 11:06:42
Jaw crusher is mainly driven by the eccentric shaft moving jaw crushing material, the working principle is very simple, very simple to operate, but in order to ensure the life of the equipment, we still need to understand the operation details of the jaw crusher.
1, jaw crusher must be no load start. After the start of the crusher if the abnormal percussion, should stop running, identify and eliminate the ills, restart the machine. After a certain period of time after the start, the normal operation can start to mine equipment. The ore to the crusher should be gradually increased until the full load operation, try to avoid overload.
2, in the course of operation, should always pay attention to the lubrication of the lubrication point is normal. Note that the temperature of the bearing, especially the eccentric bearing, is not allowed to exceed 600 ° C. Often check the mine mouth wear, according to the wear and tear to adjust the size of the mine mouth.
3, the operation process, but also often pay attention to the large ore block jamming the mine to the mine, if you have been stuck, to use the hook to flip the ore, to exclude. If the ore blockage crushing chamber, should stop the mine, to be finished within the cavity after the broken ore to the mine; if the large ore needs to be removed from the crushing chamber must be shut down with a special tool to deal with, is strictly removed from the crushing chamber Ore, in order to avoid accidents.
4, the operation must pay attention to even mine, ore not allowed to crush the crushing chamber. At the same time to the mine to prevent shovel shovel teeth and drill bits and other non-broken objects into the jaw crusher. Once found that these non-broken objects into the crushing chamber, but through the machine's discharge port, should immediately notify the belt transport positions in a timely manner, so as not to enter the next section crusher, causing serious equipment accidents.
Impact Crusher 
Circular Vibrating Screen 
ZSW Series Vibrating Feeder 
XS Series Sand Washer 
Vertical Shaft Impact Crusher 
XL series spiral sand washing machine 