Jaw crusher than other mining crusher has a more significant advantage

RELEASE TIME:2017-01-05 15:47:00

People familiar with the mining machinery industry should know that jaw crusher is mainly used to achieve crushing, crushing crushing process, which can crush the compressive strength of not more than 320Mpa materials, and can also be divided into two types, including coarse and Crushing.

The demand for high-speed road paving will place a higher demand on the application of E-break, depending on the consumption considerations, fragmentation, density and impact of the production material. E-size has such a reasonable size, lower flake, lower dust, this is the perfect mining machine for sand and gravel production line advantages. Some adjustments in the discharge port, because there is no need for less gasket, it can only be done by a simple operation of the crushing process, than other mining crusher has a more significant advantage.

In recent years, as more and more emphasis on environmental protection, desulfurization has become a key task in the electrical station and cement industry. Gypsum and limestone desulfurization is widely used in the above materials, including the E-break has become an important machine in the national environmental protection projects, the following we come to a simple understanding of some of the relevant contents of the break:

1, after the normal operation of the crusher, and then feed production.

2, crushing materials should be evenly added to the crushing chamber, and should avoid side charging or stacking charge, so as not to overload or overload unilateral.

3, the normal work, the bearing temperature should not exceed 30 ℃, the maximum temperature shall not exceed 70 ℃, beyond the above temperature should be stopped, and then identify problems and solve them.

4, stop the crusher, please stop charging, waiting for material crushing chamber completely discharged, and then turn off the power.

5, when the crusher work, as a result of crushing cavity caused by material blockage, should immediately cut off the power to stop running.

6, after a period of time, the break should be set to break the elastic bushing to prevent damage to the machine.