In the process of stone crushing, cone crusher is one of the crushing equipment we often use, but in the equipment operation and ensure the production efficiency, how to guarantee the service life of the equipment, which is we should always consider The following, we give you some assurance to ensure that the life of the cone crusher skills.
1, Equipped with buffer bunker and frequency conversion feeding equipment. As the multi-cylinder hydraulic cone crusher is broken by the principle, it requires a uniform material to the cavity, and the feeding volume, so the equipment installation and use of the time must pay attention to the equipment with buffer bin before, to ensure that the cone broken Continuous material. Equipment feeding rate to be accurately adjustable and controllable, it is recommended to install frequency conversion feeding equipment, to ensure that the equipment is full of stable feeding.
2, the installation of the center feeding device. Multi-cylinder hydraulic cone broken out of the material is also affecting its crushing effect and an important factor in life. Equipment must be installed center feeding device, to ensure its center feed. Keep the material out of the device smoothly, to prevent the material is too wet, too much or too much powder and other materials under the accumulation of equipment in the lower, and damage the equipment.
3, for the installation of iron belt equipment and anti-back device. Belt conveyor is a multi-cylinder hydraulic cone broken feed delivery device, so the correct configuration of the belt machine is also related to the good operation of the equipment. Feeding belt machine to add iron equipment, to prevent the cone broken due to excessive iron and damage to the equipment. The backstop device can prevent the feed belt machine stops when the material is too heavy to fall, thereby reducing the belt conveyor with the material to stop the production of trouble.
4, full of materials for debugging discharge mouth. Since the minimum discharge port of multi-cylinder hydraulic cone crusher does not determine its minimum particle size, it is necessary to ensure that the equipment is fully filled and the discharge port is adjusted according to the load of the equipment so as to reach the appropriate Production load and finished grain size.
Having said that, it sounds like some trouble. Do not worry, choose the Xin Heavy Industries, which you do not have to worry, Xin heavy industry for your free measurement of the scene, free installation site, free production process, the service intimate and thoughtful, from all your worries, so you do not present , Only poetry and far fields.
