In the crushing machine construction production in the Zhongxin Heavy Industry sum of three categories for your heart analysis, cone crusher from the feeding process to the correct operation method:
First, equipment startup and stop correct operation strategy are as follows: 1. Buy taper crushing machine motor type selection of appropriate starter based on, the starter to the device. 2. Should be in a certain sequence of starting and stopping.3. So that the use of the former, should be carried out test machine test, until the device is running smoothly before adding material. (Note: the feeding should be uniform, not overload operation.)4. The machine should be stopped before the start of the feeding, the standby internal material emptying, can stop.
Second, feeding process, the production of equipment is particularly important. 1, into the machine material should be with taper crushing machine technical requirements, not leapfrog equipment specified range of particle size and moisture content should not be too large, to prevent blockage of the feeding mouth, pasting machine phenomenon. 2, feeding should be uniform, can effectively improve the efficiency of fragmentation. 3, metal materials are forbidden to enter the machine, to prevent damage to important parts of bearings.
Third, row material as a cone crusher in the last procedure, the maintenance is also particularly important. 1, should ensure that the discharge of the material flow, so as not to cause the accident caused by overload. 2, regular maintenance material, such as the discovery of nesting grain does not conform to the specifications, should be timely rest.
